خریداروایرود با ضمانت نامه می باشیم . 1) d.5,5mm SAE 1006 Rm= 380-410 MPa Drawing quality Quantity: 100 tn/month 2) d.6,0mm, 7,0mm, 9,0mm SAE 1008/SAE 1010 Mesh quality d.5,5mm SAE 1008 Drawing quality Quantity: 500-1400 tn Chemical composition: C: 0,06-0,10% Mn: 0,40-0,60% Si: 0,15-0,25% Cu: max 0,25% P: max 0,025% S: max 0,025% Cr: max 0,10% Ni: max 0,10% Ceq<0,4% Rm = 380-450 MPa (aim to 420 MPa) A5 - min 34% A10 = 5 Quantity: d.6,0mm - 500-1000 tn/month d.7,0mm - 200 tn/month d.9,0mm - 200 tn/month 3) d.5,5mm SAE 1010/SAE 1012 Quantity: 500-1000 tn Drawing quality Quantity: 1000 tn/month Chemical composition: C: 0,10-0,14% Mn: 0,35-0,50% Si: 0,19-0,23% Cu: max 0,25% P: max 0,025% S: max 0,025% Cr: max 0,10% Ni: max 0,10% Mo: max 0,02% Al: max 0,01% Rm = 420-470 MPa (aim to 430-460 MPa) Re = min 300 MPa A5 - min 34% 4) d.9,0mm, 11,0mm, 13,0mm, 16,0mm, 18,0mm S355J2 Quantity: 300-800 tn Mesh quality Quantity: 300-800 tn/month in all diameters Chemical composition: С = max 0,20%, Mn max 1,6 Si = 0,15-0,25%, S = 0,02 - 0,040% (S min 0,02% important) P max 0,025% N2: max 0,012% Al: 0,020-0,050% (important) Rm max 600 MPa d5 - min 25% 5) d.9,0mm, 11,0mm, 13,0mm, 16,0mm, 18,0mm 11SMn30 and 11SMnPb30 Quantity: 500-800 tn Mesh quality Quantity: 500-800 tn/month in all diameters 6) d.5,5mm C82D2 Quantity: 500 tn Drawing quality Quantity: 500 tn/month Please send information acc. possibility of production, terms of production, terms of payment.